Manley MANLEY REFERENCE DIGITAL TO ANALOGUE CONVERTER Owner's Manual download pdf (Page 7)

OPERATIONAL NOTES

SWITCHING ON

The power switch is located on the right hand corner of the front panel. Flip the

switch up to turn on the unit and down to turn off the unit. When powering up or

down this unit, it is recommended to have the MANLEY JUNIOR STEREO DAC muted

as to avoid amplifying powering up/down noises which occur as the digital receiver

"loses clock" with the digital source. Also, it is recommended to mute the MANLEY

JUNIOR STEREO DAC while changing digital input connections or powering up or

down digital sources. Failure to abide by the above recommendations can result in

damage to your loudspeakers if these noises are amplified to excessive levels.

CHANGING THE GAIN

Your MANLEY JUNIOR STEREO DAC has been factory calibrated using precise test

equipment for 10dBs of equal gain in both channels. If you wish to change this

setting, we recommend using a reference test compact disc and either an

oscilloscope if available and/or an AC / VTTM / or DMM meter to measure levels at

the output of the DAC. Remember, never play sine wave test tones at high levels

through your loudspeakers.

1 2 3 4 5 6 7 8 9 10 11

No comments

Manley MANLEY REFERENCE DIGITAL TO ANALOGUE CONVERTER Owner's Manual Page 7